Philips 27PC4326-37 - Manual (Page 9)

Hooking Up the TV/VCR/DVD 9
ANT.
AUDIO OUT AUDIO OUT COAXIAL COAXIAL
ANT.
ANT.
AUDIO OUT AUDIO OUT COAXIAL
IN OUT
ANT.
Connect an
RF coaxial cable
(not supplied) to
the OUT Jack on
the Cable Box/
Satellite Receiver
and to the
ANT.(enna) Jack
on the
TV/VCR/DVD.
Connect a Cable TV
signal or an antenna to
the ANT.(enna) Jack.
1 Hook up your TV/VCR/DVD using
one of the connections shown.
A Hooking Up Your TV/VCR/DVD
with a Cable TV Signal or
Outdoor Antenna
Connect the Cable TV
or Satellite signal to the
IN Jack on the Cable
Box/Satellite Receiver.
B Hooking Up Your TV/VCR/DVD
with a Cable Box/Satellite Receiver
To view any channel, set the TV/VCR/DVD to
the output channel (channel 03 or 04) of the
Cable Box/Satellite Receiver.Then, select
channels at the Cable Box/Satellite Receiver.
Your Cable Box/Satellite Receiver may have Audio and Video Out jacks instead of the single
Antenna Out jack (RF coaxial or 75 ohm) shown here.
If so, connect Audio and Video cables to the Audio/Video Out jacks of the Cable Box/Satellite
Receiver and to the AUDIO/VIDEO In jacks on the front of the TV/VCR/DVD.
Press SELECT on the remote to set the TV/VCR/DVD to AUX, not channel 3 or 4. Select
channels you want to watch or record at the Cable Box/Satellite Receiver as usual, leaving the
TV/VCR/DVD on AUX.
Instructions continue on the next page.
T3221UB_EN1 5/8/06 6:29 PM Page 9