Philips 46PFL3708-F7 - Manual (Page 15)

15 English
PC connection
HDMI connection
This unit can be connected to your PC that has a HDMI terminal. Use an
HDMI cable for this Digital connection.
HDMI-DVI connection
This unit can be connected to your PC that has a DVI terminal. Use an
HDMI-DVI conversion cable for this Video Digital connection and it
requires Stereo mini 3.5mm plug Audio cable for Analog Audio signal as
well.
VGA connection
This unit is equipped with a PC Input jack. If you connect this unit to
your PC, you can use this unit as a PC monitor.
Use a VGA cable for this Video connection and it requires a Stereo mini
3.5mm plug Audio cable for Analog Audio signal as well.
The following video signals can be displayed:
Other formats or non-standard signals will not be displayed correctly.
* 50PFL3708 / 46PFL3708 / 40PFL4708 / 40PFL1708 / 39PFL2708
only.
USB Memory Stick
This unit offers easy playback of picture (JPEG) and video (Motion JPEG)
files.
Insert the USB Memory Stick into the USB terminal shown below.
USB ➟ p.32
IN IN IN OUT
PC HDMI cable
OUT
IN IN IN
OUT
IN IN IN
HDMI-DVI
conversion cable
PC
Stereo mini 3.5 mm plug Audio cable
OUT IN IN IN
IN IN IN
OUT
PC
VGA cable
Stereo mini 3.5 mm plug Audio cable
Format Resolution Refresh rate
VGA 640 x 480
60Hz
SVGA 800 x 600
XGA 1,024 x 768
WXGA
1,280 x 768
1,360 x 768
FHD* 1,920 x 1,080
Note
• Please purchase the VGA cable or HDMI-DVI conversion cable that has a ferrite core.
• The following operations may reduce noise.
– Attach a ferrite core to the AC power cord of your PC.
– Unplug the AC power cord and use the built-in battery of your PC.
• Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI
cable is recommended for the better compatibility.
• The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.
• HDMI-DVI connection requires separate audio connections as well and the audio
signals are output as Analog (L/R) Audio.
• DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.
Note
• The unit recognizes only a USB Memory Stick.
• Do not use a USB hub or an extension cable to connect an external hard disk drive to
the unit. (Not supported.)
• A USB Memory Stick is always inserted to this unit directly.
• A USB Memory Stick is not supplied with this unit.
• We do not guarantee that all USB Memory Sticks can be supported by this unit.
• Be sure to keep a backup copy of the original files on your device before you play
them back on this unit. We have no responsibilities for damage or loss of your stored
data.
• To protect your USB Memory Stick files from being erased place the write protect
sliding tab in the protect position.
• When you are ready to remove a USB Memory Stick, set the unit to go into Standby
mode to avoid any damage to your data and the unit.
• A USB Memory Stick that requires its own driver or the device with a special system
such as fingerprint recognition are not supported.
• This unit is not allowed to use the USB Memory Stick which requires an external
power supply (500mA or more).