Philips 46PFL3708-F7 - Manual (Page 29)

29 English
Canadian English or Canadian French ratings
You can select the rating for Canadian English or Canadian French
broadcasting.
3
Use ▲▼ to select Canadian English rating or Canadian French
rating, then press OK.
4
Use ▲▼ to select the desired rating, then press OK repeatedly to
switch between view and block.
•
indicates that the rating is locked.
• indicates that the rating is not locked.
Change PIN
Although the default PIN code (0000) is supplied with the unit, you can
set your own PIN code.
3
Use ▲▼ to select Change PIN, then press OK.
4
Press the NUMBER buttons to enter the new 4-digit PIN code.
• Enter PIN code again in Confirm PIN. entry field.
PC settings
This function lets you adjust the PC screen position, clock and phase
during PC Input.
Use ◄► to adjust Clock setting to stabilize the PC screen and Phase
setting to improve the clarity of the PC screen.
1
Use ▲▼ to select PC settings, then press OK.
2
Use ▲▼ to select the item you want to adjust, then press OK.
• The horizontal/vertical position, clock and phase of the PC
screen are automatically adjusted.
Canadian
English rating
Canadian
French rating Description
All Locked all ratings
E Exempt program
C – For all children
C8+ – For children over 8
G General audience
– 8ans+ Unsuitable for ages under 8
PG – Parental guidance suggested
– 13ans+ Unsuitable for ages under 13
14+ – Unsuitable for ages under 14
– 16ans+ Unsuitable for ages under 16
18+ 18ans+ Adult audience only
Note
• The V-Chip can block non rated programs as per “CEA-608-E sec. L.3”. If the option
to block NR, None or E programs is used in US movie ratings lock, US TV ratings
lock, Canadian English rating or Canadian French rating accordingly “unusual results
may occur and the unit may not receive emergency bulletins or other types of
programming”: / Emergency Bulletins (Such as EAS messages, weather warnings and
others) / Locally originated programming / News / Political / Public Service
Announcements / Religious / Sports / Weather.
Note
• Make sure new PIN code and confirm PIN code must be exactly the same. If they are
different, the space is cleared for reentering.
• Your PIN code will be erased and returns to the default PIN code (0000) when a
power failure occurs.
• If you forget the PIN code, unplug the AC power cord then wait for 10 seconds to
plug the AC power cord in again.
The unit will restore the PIN code to 0000 as the factory default.
Picture
Sound
Setup
Features
Language
USB
Back PIN Code
Enter PIN.
Confirm PIN.
Auto adjustment Select if you want to adjust automatically.
Cursor ◄ Cursor ►
Horizontal position to move PC screen left to move PC screen right
Vertical position
to move PC screen
down
to move PC screen up
Clock
to decrease setting value to increase setting value
Phase
Note
• You may not obtain an appropriate screen with Auto adjustment for some signals. In
this case, adjust the settings manually.
• Adjust Phase setting after Clock setting has been properly adjusted.
Picture
Sound
Setup
Features
Language
USB
Auto adjustment
Horizontal position
Vertical position
Clock
Phase
0
0
0
0