Philips 201B45-74 - Manual (Page 103)

The OSD Controls
4) Press the button to highlight DEGAUSS.
5) To degauss your screen, press the button. Your screen will be degaussed, then the MAIN
CONTROLS window will reappear. CLOSE MAIN CONTROLS will be highlighted.
Smart
Help
After returning to MAIN CONTROLS . . .
. . . to continue to ADJUST MOIRE, press the button until EXTRA
CONTROLS is highlighted. Next, start with step 3 under EXTRA CONTROLS,
ADJUST MOIRE.
. . . to exit completely, press the button.
ADJUST MOIRE (Not available in all models)
EXTRA CONTROLS is a set of three features, including ADJUST MOIRE. Moire is a fringe pattern
arising from the interference between two superimposed line patterns. To adjust your moire, follow
the steps below. Note: Use only if necessary. By activating ADJUST MOIRE, sharpness can be
affected.
1) Press the button on the monitor. The MAIN CONTROLS window appears.
file:///D|/EDFU/crt_19/edoc/english/OSD/osd_cont.htm (24 of 27)7/19/2004 4:11:18 PM