Philips SPZ2500-00 - Manual (Page 6)

4 EN
2 Get started
(Optional) Install the webcam
software and driver
Note
To use special features provided by Philips •
CamSuite and Webcam Driver SPZ2000/
SPZ2500, visit www.philips.com/support and
download the applications from the website.
Philips CamSuite only works on PCs with the
operating systems Microsoft ® Windows ® XP
(SP2 and higher), Vista, or Windows 7. After
the software installation, you can adjust Philips
SPZ2500 webcam settings on respective
property pages.
1
At www.philips.com/support, click the
Choose country / language box to select
your country/language.
2
Click the Search box, enter SPZ2500 and
then click the search button.
3
Click SPZ2500 under the search results.
4
Click Support.
Under » Product support, you will
find information about Software and
drivers.
5
Download the software or driver installer
that you want.
6
Run the installer and follow the
instructions on the screen to complete
the installation.
Tip
You can use the same way to download the •
latest software and driver available for Philips
SPZ2500 webcam.
Connect the webcam to your
PC/notebook
1
Turn on the PC/notebook.
2
For the first time you use the webcam
with Philips CamSuite, install the software
downloaded from the website.
After the software installation is complete, »
the Philips CamSuite icon is displayed at
the lower right corner of the screen.
3
Use the clamp to mount the webcam on
your PC monitor or notebook display.
Fold the clamp to place the webcam •
on a desk or (large) desktop monitor.
4
Connect the cable to a USB port on the
PC/notebook.
After the webcam is properly »
connected, the following pop-up
window is displayed at the lower right
corner of the screen .
5
Aim the webcam in a proper angle.
6
Connect the headphone plug to the
socket and the microphone plug to the
socket on the PC/notebook.