Philips 19S4LSB5-27 - Manual (Page 10)

8
2. Setting up the monitor
2.3 Remove the Base Assembly for
VESA Mounting
Before you start disassembling the monitor base,
please follow the instructions below to avoid
any possible damage or injury.
1. Place the monitor face down on a smooth
surface. Pay attention not to scratch or
damage the screen.
2. Use a flathead screwdriver to remove four
mylars from the hinge cover.
3. Remove the screws from hinge cover.
4. Remove the base assembly.
Note
This monitor accepts a 100mm x 100mm
mounting interface.
AUDIO IN
100mm
100mm