Philips 63PF9631D-37B - Manual (Page 34)

Available channels:
- Cable (analog NTSC or digital QAM): max. from 1 to 135
- Terrestrial (analog NTSC or digital ATSC): max. from 2 to 69
If a tuned channel is not yet in the master channel map, the
TV will attempt to tune the channel and it will be added to
the map.
If the channel is not acquired, a message will appear that the
channel is not available.
When you tune an audio-only digital subchannel, a display
appears with the message Audio only.
How to search for and store TV channels (continued)
32
Channel tuning
Important: After the installation of the TV channels has been
done, always make a selection in the Installation menu,
Installation mode between Antenna or Cable whether you
want to watch Antenna TV channels or Cable TV channels.
Notes:
- Subchannel selections
The new standards employed with digital broadcasting make
it possible to receive multiple program channels under a
single major channel number which can be selected by
pressing the digit channel number entry.
- Digital Channel selection delay
Due to the tuning complexity of subchannel digital
programming, the time to select and view a digital channel
may take slightly longer than what the viewer is normally
accustomed to (as compared to analog channel programs).
Digital channel broadcasts contain program and system data
information that must be processed before the channel
selection can be displayed.
Note: If you make use of a signal splitter do not forget to put
the switch in the corresponding position.
2572.3 en 22-03-2007 13:16 Pagina 32