Philips 63PF9631D-37B - Manual (Page 47)

To make video and audio connections (Continued)
45
English
User Man
ual
Camera, Camcorder, Game
1. Connect your camera, camcorder or game
as shown.
2. Connect to VIDEO 2 and AUDIO L 3
for mono equipment. For stereo equipment
also connect
AUDIO R 3.
S-VHS quality with an S-VHS camcorder is
obtained by connecting the S-VHS cables
with the
S-VIDEO input 1 and AUDIO
inputs 3.
Headphone
1. Insert the plug into the headphone socket
L as shown.
2. The headphone impedance must be
between 8 and 4000 Ohm.The headphone
socket has a 3.5 mm jack.
In the Sound menu select Headphone
volume to adjust the headphone volume.
USB
See Multimedia browser, p. 41.
1
2
3
1
2
3
USB
USB
Warning: do not connect cable 1 and 2
at the same time.This may cause picture
distortion !
Tip: Press ¬ on the remote control to
switch off the internal loudspeakers of the TV.
Side panel overview
Notes:
- Cables are often color-coded to connectors. Connect red to red, white to white....
- Component video (YPbPr) connection is necessary to view video sources, for example digital
broadcastings coming from a settop box, in 1080i, 720p, 480i or 480p;
- The labels for the component video sockets may differ depending on the DVD player or the device
connected. Although the abbreviations may vary, the letters B and R stand for the blue and red
component signals, respectively, and Y indicates the luminance signal. Refer to the DVD player’s or
devices instructions for use for definitions and connection details;
- This television is designed to accept high definition signal standards 480p, 720p and 1080i as specified
by the Electronic Industries Association standard EIA770.3.
Digital devices from different manufacturers have the possibility of differing output standards which
may cause difficulties for the television to properly display.
2572.3 en 22-03-2007 13:16 Pagina 45