Philips 63PF9631D-37B - Manual (Page 62)

Automatic software upgrade procedure
1. Turn off your TV and remove all memory devices.
2. Insert the portable memory that contains the downloaded
software upgrade.
3. Switch on your TV with the POWER button on your
remote control.
4. At startup the TV will scan the portable memory until it
finds the update content.The TV will automatically go to the
upgrade mode. After a few seconds it will display the status
of the upgrade procedure.
5. When the software upgrade was successful, remove the
portable memory and restart your TV with the POWER
button on your remote control.
Your TV will start up with the new software.
Warning:
- you are not allowed to remove the portable memory
during the software upgrade procedure;
- in case of a power drop during the upgrade procedure,
don’t remove the portable memory from the TV.The TV
will continue the upgrade as soon as the power comes
back;
- if an error occurs during the upgrade you should retry
the procedure or contact your dealer.
Note: once the upgrade is finished use your PC to
remove the TV software from your portable memory.
Annex 1 (Continued)
60
Software Id: TL32E-234
Loading Done
Validating Done
Programming
Software Upgrade Application
Upgrade busy...
Manual software upgrade procedure
For a manual software upgrade copy the “autorun.upg” file
in a directory called “Upgrades” located in the root of the
portable memory.
Rename this file as “firmware_upgrade.upg”.
1. Insert the portable memory that contains the downloaded
software upgrade.
2. Select Software Upgrade in the Installation menu. Go to
Local upgrades.
The TV will list all compatible software available on the
portable memory and display the data for each selected
upgrade version.
3. Select the correct upgrade version and press the red color
button to start the upgrade.
Your TV will restart and will automatically go to the upgrade
mode. After a few seconds it will display the status of the
upgrade procedure.
4. When the software upgrade was successful, remove the
portable memory and restart your TV with the POWER
button on your remote control.Your TV will start up with
the new software.
Warning: if you try to upgrade to a software version
equal or lower than the current version, a confirmation
will be asked. Downgrading to older software should only
be done in case of real necessity.
Info
TV menu
Installation Software upgrade
Current softw. info
Local upgrades
Language
Channels
Preferences
Connections
Clock
Reset AV settings
Software upgrade
2572.3 en 22-03-2007 13:16 Pagina 60