Philips LED monitor 247E3LPHSU E-line 23.6" - 59.9 cm with PowerSensor - Manual (Page 11)

9
2. Setting up the monitor
2.3 Remove Base Stand
Remove the Base Stand
Before you start disassembling the monitor
base, please follow the instructions below to
avoid any possible damage or injury.
1. Place the monitor face down on a smooth
surface, taking care to avoid scratching or
damaging the screen.
2. Detach the base stand away from the base
column by:
(1) Use your fingers to loosen the screw
located at the bottom of the base.
(2) Gently move up-and-down to release
the latch that locks the base and pull
the base away from the base column.
2
1