Philips 225P2EB-27 - Manual (Page 10)

8
2. Place the monitor face down on a smooth
surface, taking care to avoid scratching or
damaging the screen. Then lift the monitor
stand.
100mm
100mm
2.3 Remove the Base
Condition:
• For VESA standard mounting applications
Before you start disassembling the monitor base,
please follow the instructions below to avoid
damage or injury.
1. Extend the monitor base to its maximum
height.
3. While keeping the release button pressed, tilt
the base and slide it out.
Note
This monitor accepts a 100mm x 100mm
VESA-Compliant mounting interface.