Philips BDS4621-27 - Manual (Page 25)

25
User Manual BDS4621
7.8 Other Functions
• If an image cannot be displayed after
changing the timing in PC mode, press the
AUTO button.
• The unit will automatically adjust the phase,
horizontal/vertical position to optimize the
display.
• Also, if the image cannot be shown after
changing the playback system in “Video Input
mode”, press the
AUTO button.The unit will
select the appropriate format for the image
system.
Note: For information about the timing
capabilities of the unit, refer to
Chapter ‘Factory Settings’.
• Press the FREEZE button to freeze (or
suspend) the current screen.You may press
the Freeze button again to continue the
playing.
Note: You can only freeze the screen by
pressing the
FREEZE button.The
play back system keeps playing
when the screen is frozen.
• You can press the PIP button to show the
picture-in-picture screen.The screen will
change as follows when you press the
PIP
key consecutively:
Note: The “Picture-in-picture screen” can
receive video images while the PC
outputs the display to the Main
Screen, so the prerequisites for the
display of the sub-picture include:
1. A video module.
2.The Main Screen (must be a PC
display).
3.The video image source must also
be connected.
• The location of the sub-picture on the
screen and the video image source can be
set from the OSD menu.
POWER
MENU
INPUT MTS
PC
WIDE PIP FREEZE AUTO
CH
VOL
VIDEO
EXIT
1 2
+
-
3
4 5 6
7 8 9
0 100
ZOOM
RETURN
FULL WHITE WOW MUTE DISPLAY
MENU
POWER
MENU
INPUT MTS
PC
WIDE PIP FREEZE AUTO
CH
VOL
VIDEO
EXIT
1 2
+
-
3
4 5 6
7 8 9
0 100
ZOOM
RETURN
FULL
WHITE WOW MUTE DISPLAY
MENU
Sub-picture open (small) Medium Large Sub-picture closed
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 25