Philips BDS4621-27 - Manual (Page 38)

Problem: Measures:
No Power
(Power indicator does not light) • Remove the power cable from the power
outlet for 10 seconds, then re-insert the plug
into the outlet.
‘No Input Signal’ message
appears.
• Check that the signal line is connected
properly.
• Check that the power of the relevant
peripherals is turned on.
• Check that the Input option that has been
selected matches the input signal.
The remote control does not
work. • Check the batteries for correct placement.
• Replace with new batteries.
• Check to make sure the Remote Control is
within operating range.
• Check to make sure the Remote Control is
pointed to the Remote Control Window on
the Display.
• Check that there are no obstacles between
the Remote Control and the Remote
Control Window.
• For more information about the Remote
Control, refer to Chapter Basic Operation.
Flashing spots or stripes appear
on the screen. • Check that there is no emitter sources (Car,
HV cable or Neon lamp) or other possible
interference sources.
Image color or quality
deteriorates. • Check that all the video settings are adjusted
appropriately, such as brightness, contrast,
color etc.
• For more information about video settings,
refer to ‘OSD Functions’ in the chapter ‘Basic
Operation’.
Screen position and size are
incorrect. • Check that the screen position and size is
adjusted appropriately.
Image or color is incorrect. • Check that the signal line is connected
properly.
• When connecting to a PC, you can change
the resolution of PC to acquire correct
image.The discrepancy of the PC output
signal may affect the display of the image.
38
User Manual BDS4621
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 38