Philips Brilliance 4K Ultra HD LED Backlit Monitor 288P6LJEB P-line 28" - 71.1 cm 4K Ultra HD 3840 x 2160 User Manual
Page 12
![background image](/manuals/537068/12/background.png)
10
2. Setting up the monitor
How to enable MultiView by hotkey?
1. Press
the
hotkey
directly on the
front bezel.
2. The
MultiView
selection menu appears.
3UHVV ɼ RU ɾ EXWWRQ WR VHOHFW
PbP
Swap
Off
PiP
Multi View
P
3. Press
EXWWRQ WR FRQÀUP \RXU VHOHFWLRQ
and then exit automatically.
How to enable MultiView by OSD menu?
Besides pressing the hotkey
directly on
the front bezel
, the MultiView function can also
be selected in OSD menu.
1. Press button on the front bezel to
enter OSD Menu Screen.
PiP/PbP
Audio
Picture
Input
Color
PiP/PbP Mode
PiP/PbP Input
PiP Size
Swap
PiP Position
Off
PiP
PbP
3UHVV ɼ RU ɾ EXWWRQ WR VHOHFW PDLQ PHQX
[PiP / PbP], then press
button.
3UHVV ɼ RU ɾ EXWWRQ WR VHOHFW >PiP / PbP
Mode], then press
button.
3UHVV ɼ RU ɾ EXWWRQ WR VHOHFW >PiP] or
[PbP].
Now you can move backward to set the
[PiP / PbP Input], [PiP Size], [PiP Position].,
or [Swap].
2. Press
EXWWRQ WR FRQÀUP \RXU VHOHFWLRQ
MultiView in OSD menu
PiP / PbP Mode: There are two modes for
MultiView: [PiP] and [PbP].
[PiP]: Picture in Picture
Open up a sub-window of
another signal source.
B
A
(main)
When the sub source is not
detected:
B
A
(main)
[PbP]: Picture by Picture
Open up a sub-window side-
by-side of another signal
source.
A
(main)
B
When the sub source is not
detected:
A
(main)
Note
The black strip shows on the top and the
bottom of the screen for the correct aspect
ratio when in the PbP mode.