Philips YS524-41 - Manual (Page 19)

- Be careful with hot water. Always test water first
so as not to burn or scald hands.
- While rinsing the appliance, water may drip out of
the base of the appliance. This is normal. Simply
hold appliance upright for 10-15 seconds.
Cleaning the Shaving Unit
1 Rinse the shaving unit under hot water for a
couple of minutes.
2 Press the shaving unit release buttons (1) and
pull shaving unit off the shaving attachment (2).
3 Rinse the shaving unit for 30 seconds under
hot water.
4 Carefully shake off excess water and let the
shaving unit air dry thoroughly.
Never dry the shaving unit with a towel or tissue
as damage may occur to the shaving heads.
5 Reattach the shaving unit to the shaving
attachment.
Note: You can also clean the shaving attachment
and shaving unit with the supplied brush.
Extra-thorough Cleaning Method
1 Press the shaving unit release buttons (1) and
pull shaving unit off the shaving attachment (2).
English
19
12_YS524.indd 19 11/12/12 11:54 AM