Philips YS524-41 - Manual (Page 21)

8 Reattach the retaining ring (1) by turning it
the opposite direction of the arrows on the
retaining ring (2).
Make sure the four wings of the retaining ring
are located exactly under the recesses of the
shaving head holder.
9 Reattach the shaving unit to the shaving
attachment. If it does not close smoothly, check
that the shaving heads and retaining rings are
positioned properly.
Cleaning the Bodygroom Attachment
1 If a trimming comb is attached to the appliance,
remove it.
2 Pull the bodygroom foil off the attachment.
Do not apply pressure to foil. Do not touch foil
with hard objects as this may dent or damage foil or
cutters. If damage occurs, replace damaged parts.
3 Rinse the bodygroom attachment, foil and
comb under hot water.
You can also clean the attachment, foil and comb
with the supplied brush.
4 Shake off excess water and allow to air dry
thoroughly.
5 Place bodygroom foil back on the attachment.
English
21
12_YS524.indd 21 11/12/12 11:54 AM