Philips YS524-41 - Manual (Page 20)

2 Unlock the orange retaining ring by turning it
in the direction of the arrows on the retaining
ring.
3 Lift the retaining ring out of the shaving head
holder.
4 Remove the cutter and comb and separate the
cutter from the comb.
Tip: Do not clean more than one cutter and
comb at a time as they are matching sets. If
you accidentally put a cutter in the wrong
comb, it may take several weeks before
optimal shaving performance is restored.
5 Clean the inside and outside of both the cutter
and comb with the supplied brush.
6 Place the comb in the shaving head holder
making sure the two wings fit exactly in the
recesses of the shaving head holder.
7 Place the cutter into the shaving head holder
with the cutter legs pointing down.
English
20
12_YS524.indd 20 11/12/12 11:54 AM