Philips 15C3220W - Manual (Page 7)

7
How to Use the On Screen Display (osd)
GEOMETRY WINDOW
T T r r apezoid apezoid Pincushion Pincushion
Pincushion is to correct the pincushion distortion of the
image. Note: Use this feature only when the picture is not
square.
Trapezoid is to correct the trapezoid distortion of the
image. Note: Use this feature only when the picture is not
square.
Press the MAIN button to
highlight BASIC, then press
MAIN button to select the
GEOMETRY control window.
Press the SUB button to
highlight the
icon
(PINCUSHION is selected.)
When finished, press the
MAIN and SUB button at
the same time. The
display screen disappears.
To continue MAIN MENU options, press the MAIN button on the
front of the monitor.
To continue to SUB MENU options, press the SUB button on the
front of the monitor.
If you do not press any button, the Pincushion window will “time
out” (disappear) after ten seconds.
SMAR SMAR T HELP T HELP
To continue MAIN MENU options, press the MAIN button on the
front of the monitor.
To continue to SUB MENU options, press the SUB button on the
front of the monitor.
If you do not press any button, the Trapezoid window will “time out”
(disappear) after ten seconds.
Press the MAIN button to
highlight BASIC, then press
MAIN button to select the
GEOMETRY control window.
Press the SUB button to
highlight the
icon
(TRAPEZOID is selected.)
When finished, press the
MAIN and SUB button at
the same time. The display
screen disappears.
Press the or
button to adjust
PINCUSHION.
Press the or
button to adjust
TRAPEZOID size.
SMAR SMAR T HELP T HELP
1 1 1 1
2 2 2 2
3 3 3 3
4 4 4 4