Safety & troubleshooting, Safety and troubleshooting information – Philips 107T4174 User Manual
Page 2
Safety and Troubleshooting Information
Safety Precautions and Maintenance
•
Safety precautions and maintenance
WARNING: Use of controls, adjustments, or procedures other than those
specified in this documentation may result in exposure to shock, electrical
hazards, and/or mechanical hazards.
Read and follow these instructions when connecting and using your computer monitor:
Disconnect the monitor from the power supply if the monitor is not to be used for an extended period
of time.
●
Do not attempt to remove the back cover, as you will be exposed to a shock hazard. The back cover
should only be removed by qualified service personnel.
●
Do not place objects on top of the monitor cabinet, objects could fall into vents or cover them and
prevent proper cooling of the monitor's electronic devices.
●
To avoid the risk of shock or permanent damage to the set, do not expose the monitor to rain or
excessive moisture.
●
Do not use alcohol or ammonia-based liquid to clean the monitor. If necessary, clean with a slightly
damp cloth. Disconnect the monitor from the power supply before cleaning.
●
When positioning the monitor, make sure the power plug and outlet are easily accessible.
●
Consult a service technician if the monitor does not operate normally when operating instructions of this
manual are followed.
Safety & Troubleshooting
file:///D|/Rita/LF3/lf3manual/english/107T/SAFETY/SAFETY.HTM [2002/7/7 ?? 11:12:27]