Philips 32PT842H - Manual (Page 19)

19
Y our television comes with an on-screen
clock. During normal operation, the clock
appears on the screen when the STATUS/EXIT
button is pressed or if the TIMER DISPLAY
control is turned ON.
1 Press the MENU button on the
remote control to show the onscreen
menu.
2 Press the CURSOR DOWN button
twice to highlight FEATURES.
3 Press the CURSOR RIGHT button and
the menu will shift to the left. TIMER will
be highlighted.
4 With TIMER selected, press the CUR-
SOR RIGHT button again to shift the
display left and highlight the TIME con-
trol.
5 Press the CURSOR RIGHT button
again to highlight the time indicator area.
6 Press the CURSOR LEFT or CURSOR
RIGHT button to select the position or
digit you wish to enter.
7 Press the CURSOR UP or CURSOR
DOWN button to select the digits for the
time. Or press the NUMBERED but-
tons to enter the correct time.
8 Press the CURSOR RIGHT button to
move to the AM or PM position.
9 Press the CURSOR UP or DOWN
button to set AM or PM.
Press the STATUS/EXIT button to
remove the menu from the screen.
S
ETTING THE
TV C
LOCK
U
SING THE
T
IMER
C
ONTROL
PICTURE
SOUND
FEATURES
INSTALL
TIMER
ACTIVE CTRL
AutoLock
PIP
CLOSED CAP
FEATURES
TIMER
ACTIVE CTRL
AutoLock
PIP
CLOSED CAP
TIME
START TIME
STOP TIME
CHANNEL
ACTIVATE
FEATURES
TIME _ _:_ _ AM
START TIME
STOP TIME
CHANNEL
ACTIVATE
TIMER
TIME 10:30 AM
START TIME
STOP TIME
CHANNEL
ACTIVATE
TIMER
FEATURES
FEATURES
FEATURES
TIME 10:_ _ AM
START TIME
STOP TIME
CHANNEL
ACTIVATE
TIMER
FEATURES
10 1
3
4
5
6
8
2
7
9
6
7
9
7
Remember, be sure to press 0 first and then
the hour number for single-digit entries.
The TV’s clock settings may be lost when the
TV is unplugged (or when AC power to the set
is interrupted).
H
ELPFUL
H
INT
10
TIME _ _:_ _ AM
START TIME
STOP TIME
CHANNEL
ACTIVATE
TIMER
FEATURES
NOTE: The TIMER Controls can also be
accessed by pressing the CLOCK button
on the remote control. See lower diagram
on this page.