Philips 32PT842H - Manual (Page 48)

48
P
icture-In-Picture (PIP) is the showing of two pictures on the TV screen at the same time (one main screen picture and one small picture,
or PIP). For your ease and convenience, this TV has two separate inputs (ANTenna A and PIP ANTenna B) for your home’s Antenna
and/or Cable TV system signal.
The ANT A input is primarily for the TV’ s main screen picture. The PIP ANT B input is provided as a second dedicated source option for the
TV’s PIP “window” and its feature operations. The signal connected to the PIP ANT B input can be either a split signal input (as described
in the Hookup sections of the Quick Use Guide or another type of external signal source (such as a satellite dish system, additional home
antenna, video accessory, etc.).
PIP – S
ELECTING THE
S
IGNAL
S
OURCE
AV 1
AV 2
AV 3
24
5
3
2
MAIN SCREEN PICTURE PIP PICTURE
VCR
(OR SIMILAR DEVICE)
NOTE: The PIP source picture can come from the
ANT/CABLE input, the AUDIO/VIDEO AV1, the
AUDIO/VIDEO AV2, the AUDIO/VIDEO AV3, or
the S-VIDEO input jacks located at the rear and side
of the TV.
T
he picture for the PIP window can come
through either the ANT/CABLE or any of
the external Audio/Video connections at the
rear of the TV. PIP SOURCE simply tells the
TV which one of these sources it is to show in
the PIP window.
1 Turn the TV and VCR (or other
device hooked to the external A/V con-
nections) ON.
2 Press the PIP ON/OFF button on the
remote control. The PIP window
should appear in the upper right-hand
portion of the screen.
3 Press the AV button on the remote
control to toggle among the different
external connections.
The PIP SOURCE may come from the follow-
ing:
AV1, AV2, AV3, S-VIDEO, CVI: for picture
signal coming from the external audio/video
jacks on the TV. (You must have an external
device hooked up at these locations.)
ANTENNA/CABLE: for a picture signal
coming from the ANT/CABLE input on the
back of the TV.