Philips 221B3PCB-00 - Manual (Page 10)

8
2.3 Remove Base Stand and Base
Remove the Base Stand
Before you start disassembling the monitor
base, please follow the instructions below to
avoid damage or injury.
1. Extend the monitor base to its maximum
height.
70mm
2. Place the monitor face down on a smooth
surface, taking care to avoid scratching or
damaging the screen. Then lift the monitor
stand.
3. Release the lock of base stand then pull the
base stand away from the base column.
Remove the Base
Condition:
‡
For VESA standard mounting applications.
1. Remove the 8 screw covers.
.
2. Setting up the monitor