Philips SPC611NC-37 - Manual (Page 11)

EN
11
The Philips SPC 610NC video property can be changed from
within an application, or independently by clicking the VProperty
icon
‘ ’ which can be found in the Windows taskbar bottom
right of your screen. Most applications can show a 'live preview'
video image on your monitor. Always use this option to see the
effect of changed settings on your screen.
General controls
1 Flickerless
The Flickerless option should only be used under flickering
light conditions (e.g. fluorescent or neon lamps) to prevent
flickering or strangely coloured video images.
If this option is used under normal lighting conditions the
video image may be overexposed.
2 Region
If you are using the Philips SPC 610NC in Europe, select
'50 Hz' and if you are using the Philips SPC 610NC in North
America, select '60 Hz'. For Asia this setting is dependent on
the local mains output. E.g. for China, select ‘50 Hz’ and for
Taiwan, select ‘60Hz’. Please check your local mains output to
find the correct ‘Region’ setting.
1
2
Camera settings