Philips 231S2CB-27 - Manual (Page 7)

5
Connecting to your PC
Kensington anti-thief lock
AC power input
DVI-D input (available for selecting
model)
VGA input
Connect to PC
1. Connect the power cord to the back of
the montior firmly.
2. Turn off your computer and unplug its
power cable.
3. Connect the monitor signal cable to the
video connector on the back of your
computer.
4. Plug the power cord of your computer
and your monitor into a nearby outlet.
5. Turn on your computer and monitor. If
the monitor displays an image, installation
is complete.
2.2 Operating the monitor
Front view product description
: To access OSD menu.
: Return to previous OSD level.
: Dim down up to 50% of brightness
level by one touch.
: To switch monitor’s power on and off.
: To adjust the OSD menu.
: To change the signal input.
: SmartImage. There are 6 modes to be
selected: Office, Photo, Movie, Game,
Economy and Off.
6 7
5
4 1 2 3