Brother DCP-135C - Manual (Page 16)

Chapter 1
8
Warning LED indications
1
The status LED (Light Emitting Diode) is a
light that shows the DCP status. The LCD
shows the current machine status when the
machine is idle.
Printing Reports
1
The following reports are available:
„
Help List
A help list about how to quickly program
your machine.
„
User Settings
Lists your settings.
How to print a report
1
a
Press Menu.
b
Press a or b to choose
3.Print Reports
.
Press OK.
c
Press a or b to choose the report you
want.
Press OK.
d
Press Mono Start.
e
Press Stop/Exit.
LED DCP
status Description
Off
Ready The DCP is ready for use.
Red
Cover open The cover is open. Close
the cover. (See Error
messages on page 57.)
Ink empty Replace the Ink cartridge
with a new one. (See
Replacing the ink
cartridges on page 62.)
Paper error Put paper in the tray or
clear the paper jam. Check
the LCD message. (See
Troubleshooting and
Routine Maintenance
on page 54.)
Other
messages Check the LCD message.
(See Troubleshooting and
Routine Maintenance
on page 54.)