Brother DCP-135C - Manual (Page 46)

Chapter 4
38
Changing the monochrome
file format
4
a
Press Menu.
b
Press a or b to choose
2.PhotoCapture
.
Press OK.
c
Press a or b to choose
0.Scan to Media
.
Press OK.
d
Press a or b to choose
2.B/W File Type
.
Press OK.
e
Press a or b to choose TIFF or PDF.
Press OK.
f
Press Stop/Exit.
Changing the colour file
format
4
a
Press Menu.
b
Press a or b to choose
2.PhotoCapture
.
Press OK.
c
Press a or b to choose
0.Scan to Media
.
Press OK.
d
Press a or b to choose
3.ColorFile Type
.
Press OK.
e
Press a or b to choose JPEG or PDF.
Press OK.
f
Press Stop/Exit.
Understanding the
Error Messages
4
Once you are familiar with the types of errors
that can occur while you are using
PhotoCapture Center™, you can easily
identify and troubleshoot any problems.
„
Hub is Unusable.
This message will appear if a Hub or USB
Flash memory drive with a Hub has been
put into the USB direct interface.
„
Media Error
This message will appear if you put in a
memory card that is either bad or not
formatted, or when there is a problem with
the media drive. To clear this error, take
out the memory card.
„
No File
This message will appear if you try to
access a memory card or USB Flash
memory drive in the drive (slot) that does
not contain a .JPG file.
„
Out of Memory
This message will appear if you are
working with images that are too large for
the machine's memory.
This message will also appear when a
memory card or USB Flash memory drive
you are using does not have enough
available space to scan the documents.
„
Media is Full.
This message will appear if you are trying
to save more than 999 files in a memory
card or USB Flash memory drive.
„
Unusable Device
This message will appear if a USB device
or USB Flash memory drive that is not
supported has been connected to the USB
direct interface (For more information, visit
us at http://solutions.brother.com.). This
message can also appear if you connect a
broken device to the USB direct interface.