Brother DCP-135C - Manual (Page 40)

Chapter 4
32
Printing Images
4
Before you can print an individual image, you
have to know the image number.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
b
Print the index first. (See Print Index
(Thumbnails) on page 31.)
Press (PhotoCapture).
c
Press a or b to choose Print Images.
Press OK.
Note
If your memory card or USB Flash
memory drive contains valid DPOF
information, the LCD will show
DPOF Print:Yes
, see DPOF
printing on page 33.
d
Press a repeatedly to enter the image
number that you want to print from the
thumbnail index.
Press OK.
No.:1,3,6
Note
• Press b to decrease the image number.
• You can enter a range of numbers at one
time by using the Copy Options key for
hyphen. (For example, enter 1,
Copy Options, 5 to print images No.1 to
No.5.)
• You can enter up to 12 characters
(including commas) for the image
numbers you want to print.
e
After you have selected the images you
want to print, press OK to select your
settings.
If you have already chosen your
settings, press Colour Start.
f
Press a or b to choose the type of paper
you are using, Plain Paper,
Inkjet Paper
, Brother Photo or
Other Photo
.
Press OK.
g
Press a or b to choose the paper size
you are using, Letter, A4, 10x15cm or
13x18cm
.
„ If you selected Letter or A4, go to h.
„ If you selected another size, go to i.
„ If you have finished choosing
settings, press Colour Start.
h
Press a or b to choose the print size
(10 x 8cm, 13 x 9cm, 15 x 10cm,
18 x 13cm
, 20 x 15cm or
Max. Size
).
Press OK.
i
Do one of the following:
„ To choose the number of copies go
to j.
„ If you have finished choosing
settings, press Colour Start.
j
Press a or b to enter the number of
copies you want. Press OK.
k
Press Colour Start to print.
The printing positions when using A4 paper
are shown below.
1
10 x 8cm 2
13 x 9cm 3
15 x 10cm
4
18 x 13cm 5
20 x 15cm 6
Max. Size