Philips 272P4QPJKEB-00 - Manual (Page 21)

19
3. Image Optimization
Options>Input - Will only be active when
selecting Input from the drop-down Options
menu. On a non-supported display capable of
DDC/CI, only the Help and Options tabs are
available. All other SmartControl Premium tabs
are not available.
‡ Display the Source instruction pane and
current input source setting.
‡ On single input displays, this pane will not
be visible.
Options>Theft Deterrence - Theft Deterrence
Pane will only be active when selecting Theft
Deterrence Mode from the drop-down Plug-in
menu.
To enable Theft Deterrence, clicking Enable
Theft Deterrence Mode button brings up the
following screen:
‡ User can enter PIN between 4 and 9 digits
numbers only.
‡ After entering PIN, Accept button takes
user to the pop-up dialog box on the
following page.
‡ Minimum minutes set to 5. Slider set to 5
by default.
‡ Does not require the display be attached
to a different host to go into Theft
Deterrence mode.
After creating PIN, the Theft Deterrence pane
will indicate Theft Deterrence Enabled and
provide PIN Options button:
‡ Theft Deterrence Enabled is displayed.
‡ Disable Theft Deterrence Mode opens
pane screen on next page.
‡ PIN Options button only available after
user creates PIN, button opens secure PIN
web site.
Help menu
Help>User Manual - Will only be active when
selecting User Manual from the drop-down
Help menu. On a non-supported display
capable of DDC/CI, only the Help and Options
tabs are available.