Belkin F1DE101G - Manual (Page 12)

10
INSTALLATION
Powering Up the RIPC
1. Connect the included power supply unit into an available power outlet.
2. Attach the barrel plug into the power jack located on the rear of the RIPC
to the power unit.
3. Turn on your KVM Switch. If you do not have a KVM Switch, please proceed
with powering up your computers.
CPU/KVM console
reset
power
Serial 02
Serial 01 LAN
P74238-A-F1DE101G-man.qxd 4/10/03 4:25 PM Page 10