Belkin F1DE101G - Manual (Page 13)

11
INSTALLATION
1. Using a RJ45 crossover cable, connect one end to the computer and the
other end to the port labeled “Network”.
2. Set the IP address on your computer to be in the same range as 1.2.3.4
(example: 1.2.3.6).
3. Open the Microsoft® Internet Explorer web browser.
4. Enter the IP address “1.2.3.4”.
5. Enter the default login name “administrator”.
6. Enter the default password “belkin”.
CPU/KVM console
reset
power Serial 02
Serial 01 LAN
Initial Network Configuration
P74238-A-F1DE101G-man.qxd 4/10/03 4:25 PM Page 11