Belkin F1DE101G - Manual (Page 16)

INSTALLATION
14
Configuration via serial
On a computer that has HyperTerminal Services software installed, connect the
provided DB9 serial cable by attaching one end to your computer and the
other end to the port labeled “Serial 1” on the RIPC.
Open the HyperTerminal software and use the following parameters:
Serial line parameters
Parameter Value
Bits/second 115200
Data bits 8
Parity No
Stop bits 1
Flow Control None
You will now be able to set your networking configuration on the RIPC.
P74238-A-F1DE101G-man.qxd 4/10/03 4:25 PM Page 14