Philips LCD monitor 247E4LHAB E-line 23.6" - 60 cm Full HD display with SmartImage Lite - Manual (Page 6)

4
2. Setting up the monitor
2. Setting up the monitor
2.1 Installation
Package contents
VGA (optional)
MHL (optional)
AC/DC Adapter
DVI (optional) HDMI (optional)
Audio cable (optional) USB cable (optional)
247E4
Note
Use only the AC/DC adapter model: Philips AD
PC1945(247E4LSB/247E4LHSB/247E4LHAB),A
DS-65LSI-19-1(247E4QSD/247E4QHSD/247E
4QHAD/247E4QHKAD)
Install base stand
1. Place the monitor face down on soft
and smooth surface taking care to avoid
scratching or damaging the screen.
2. Hold the base stand with both hands and
firmly insert the base stand into the base
column.
(1) Gently attach the base to the base
column until the latch locks the base.
(2) Use your fingers to tighten the screw
located at the bottom of the base, and
secure the base to the column tightly.
2
1