Basic functions, Switching the system on/off, Switching the system to eco power standby mode – Philips MCD288-37 User Manual

Page 26: Power-saving automatic standby, Sound control, Volume control, Dimming the display screen

Advertising
background image

26

English

Basic Functions

Switching the system on/off

●

Press ECO POWER/STANDBY-ON B
(STANDBY B on the remote).

➜

“

HELLO” is displayed briefly. The system will

switch to the last selected source.

●

Press DISC, TUNER or AUX on the remote.

➜

The system will switch to the selected source.

To switch the system to standby mode

●

Press ECO POWER/STANDBY-ON B
(STANDBY B on the remote).

➜

The interactive sound settings, last selected

source and tuner presets will be retained in the
player’s memory.

Switching the system to Eco
Power Standby mode

●

Press ECO POWER/STANDBY-ON B in
the active mode.

➜

The system enters Eco power standby (the

ECO POWER LED is on) or normal standby
with clock display.

●

The volume level (up to a maximum volume
level of 12), interactive sound settings, last
selected mode, source and tuner presets will be
retained in the player's memory.

●

If the system is normal standby with clock display,
press and hold ECO POWER/STANDBY-
ON
Bfor 3 seconds or more to switch to Eco
power standby or vice versa.

Power-saving automatic standby

As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 15 minutes after a
disc has stopped playing.

Sound Control

DBB, DSC and LOUDNESS sound features
cannot be activated at the same time.

DBB (Dynamic Bass Boost)

DBB enhances the bass response.

●

Press DBB on the remote to enable/disable
DBB feature.

➜

Some discs might be recorded in high

modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce
the volume.

DSC (Digital Sound Control)

DSC provides a different type of preset sound
equalizer setting.

●

Press DSC on the remote repeatedly to select:
CLASSIC, JAZZ, ROCK, POP or FLAT (for DVD:
NORMAL, CONCERT, DRAMA, ACTION or
SCI-FI).

LOUDNESS

LOUDNESS feature enables the system to
automatically increase the treble and bass sound
effect at low volume (the higher the volume, the
lower the treble and bass increase).

●

Press LOUDNESS on the remote to enable or
disable LOUDNESS feature.

➜

icon appears/disappears after this feature

is enabled/disabled.

➜

LOUD ON or LOUD OFF is displayed.

Volume control

Press VOLUME -/+ (VOL +/- on the remote)
to increase or decrease the volume level.

➜

”

VOLUM XX” is displayed on the display

panel. “

XX” denotes the volume level.

To listen through the headphone

●

Connect the headphone plug to the n socket
on the front panel of the DVD player.

➜

The speakers will be muted.

To switch off the volume temporarily

●

Press MUTE on the remote.

➜

Playback will continue without sound and

“

MUTING” flashes.

●

To activate sound reproduction, you can:
– press MUTE again;
– adjust the volume controls;
– change source.

Dimming the display screen

●

Press DIM repeatedly to select different levels of
brightness for the display screen.

pg026-pg045_MCD288-37-Eng-B

2006.3.15, 16:00

26

Advertising
This manual is related to the following products: