Philips MCD288-37 - Manual (Page 36)

36
English
Radio Reception
Tuning to radio stations
1
Press SOURCE on the set repeatedly or
TUNER on the remote to select FM tuner
source.
2
Press and hold TUNING
22/33 (2/3 on
the remote) and release the button.
➜ The radio automatically tunes to a station
with sufficient reception.
3
Repeat step 2 if necessary until you find the
desired station.
● To tune to a weak station, press TUNING
22/33 (2/3 on the remote) briefly and
repeatedly until you have found optimal
reception.
Programming radio stations
You can store up to a total of 20 FM radio
stations in the memory.
Automatic programming
Press PROGRAM for more than three
seconds to activate programming.
➜ All available stations are programmed.
➜ AUTO is displayed and available stations are
programmed in order of waveband.
Manual programming
1
Tune to your desired station (refer to “Tuning to
radio stations”).
2
Press PROGRAM to activate programming.
➜
PROG flashes on the display.
3
Press PRESET н/л to allocate a number
from 1 to 20 to this station.
4
Press PROGRAM again to confirm the setting.
➜ PROG disappears.
5
Repeat the above four steps to store other
stations.
● You can override a preset station by storing
another frequency in its place.
Tuning to preset radio stations
●
Press PRESET н/л until the desired preset
station is displayed.
pg026-pg045_MCD288-37-Eng-B 2006.3.15, 16:01 36