Braun 34443 - Manual (Page 23)

Page 21
OPERATION
Ramp Electrical Override
An electrical override feature is
incorporated in the power ramp
system. The override by-pass-
es the electronic control system
to electrically power the ramp.
The override is available to stow
(fold) the ramp only.
The Ramp Override Switch is
located rear of the ramp in the
lower wall panel. Press and
hold the switch to stow (fold) the
ramp. Release the switch when
the ramp is fully stowed (stops).
Caution: If you stop pressing
the override switch before the
ramp is fully stowed, the ramp
may free-fall.
Press and hold this switch
to stow (fold) the ramp.
Ramp
Override
Switch