Belkin PM01110EA User Manual
Page 28
26
g Wireless router
sections
table of contents
1
2
3
4
6
7
8
9
10
altErnatE sEtup MEthoD
5
The Web-Based Advanced User interface is a web-based tool that you
can use to set up the router if you don’t want to use the setup Assistant
software� You can also use it to manage advanced functions of the router�
From the Web-Based Advanced User interface, you can perform the
following tasks:
•
View the router’s current settings and status
•
Configure the router to connect to your isP with the settings that
they provided you
•
Change the current network settings such as the internal iP address,
the iP address pool, DHCP settings, and more
•
set the router’s firewall to work with specific applications
(port forwarding)
•
set up security features such as client restrictions, MAC address
filtering, WeP, and WPA
•
enable the DMZ feature for a single computer on your network
•
Change the router’s internal password
•
enable/Disable UPnP (Universal Plug-and-Play)
•
reset the router
•
Back up your configuration settings
•
reset the router’s default settings
•
Update the router’s firmware
Step 1 Connect your Router
1.1 Turn off the power to your modem by unplugging the power supply
from the modem�
1.2 locate the network cable that is connected between your modem
and your computer and unplug it from your computer, leaving the
other end connected to your modem�
1.3 Plug the loose end of the cable you just unplugged into the port on
the back of the router labeled “Modem”�
1.4 Connect a new network cable (not included) from the back of the
computer to one of the wired computer ports labeled “1–4”� Note: it
does not matter which numbered port you choose�
1.5 Turn your cable or Dsl modem on by reconnecting the power supply
to the modem�