Alternate setup method – Belkin PM01110EA User Manual
Page 29
27
g Wireless router
sections
table of contents
1
2
3
4
6
7
8
9
10
5
altErnatE sEtup MEthoD
Note: Your router may have ports in different locations than depicted in the illustration above�
1.6 Before plugging the power
cord into the router, plug the
cord into the wall, then plug
the cord into the router’s
power jack�
LAN
WAN
1.4
1.6b
1.5
1.1
1.6 a
1.2
1.3
1.8 Verify that your computer
is connected properly to
the router by checking
the lights labeled “1–4”�
The light that corresponds
to the numbered port
connected to your computer
should be ON if your
computer is connected
properly� if it is not, recheck
your connections�
1.7 Verify that your modem is
connected to the router
by checking the lights on
the front of the router� The
green light labeled “Modem”
should be ON if your modem
is connected correctly to the
router� if it is not, recheck
your connections�