Alternate setup method – Belkin PM01110EA User Manual
Page 42
40
g Wireless router
sections
table of contents
1
2
3
4
6
7
8
9
10
5
altErnatE sEtup MEthoD
Setting your Connection Type if you are a Telstra
®
BigPond User
[Australia and New Zealand Only]� Use this connection type for BigPond Cable and OptusNet Cable connections only�
Clicking “Apply Changes” will reboot the router� Once the router has
rebooted, you will need to do the following:
1) Unplug the power cable from both the cable modem and the
Belkin router�
2) reconnect the power cable to the cable modem, and wait until all the
lights on the modem have stopped flashing�
3) reconnect the power cable to the Belkin router�
To confirm you are successfully connected to the internet, open an
internet browser, such as internet explorer
®
, Firefox
®
, or safari
®
, and
ensure that you can browse web pages�