Storing a pattern – Brother NX 600 User Manual
Page 129
Sewing the Various Built-In Decorative Patterns 123
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
GETTING READ
Y
CONTENTS
SEWING BASICS
U
T
IL
IT
Y
S
T
ITCHES
APPENDIX
INDEX
Storing a pattern
Combined patterns can be stored for later use. Since
stored patterns are not lost after the sewing machine
is turned off, they can be recalled at any time. This is
convenient for patterns, such as names, that will be
used often. Up to five patterns can be stored.
■ Storing a pattern
a
Create the combined pattern that you wish to
store.
• For details, refer to "Combining patterns"
b
Press
(Stitch selection key) in the operation
panel.
X
The screen containing the various types of
stitches appears.
c
Press
,
,
and (Arrow keys) until
is selected.
d
Press
(OK key).
X
The screen for selecting the storage location
(pocket) appears.
e
Press
and until the pocket (1 through 5)
where you wish to store the pattern is
selected.
indicates an empty pocket.
indicates a
pocket where a pattern is already stored.
f
Press
(OK key).
X
The contents of the selected pocket are
displayed.
g
Check the contents, and then press
(OK
key).
The contents stored in the
pocket are
overwritten.
X
"Saving..." appears while the pattern is being
stored in the pocket.
• Do not turn off the sewing machine while a
pattern is being stored, otherwise the pattern
data may be lost.
X
After the pattern is stored, the initial stitch
screen appears again.
■ Recalling a pattern
a
Press
(Stitch selection key) in the operation
panel.
X
The screen containing the various types of
stitches appears.
b
Press
,
,
and (Arrow keys) until
is selected.
c
Press
(OK key).
X
The screen for selecting a pocket appears.
d
Press
and until the pocket containing the
pattern that you wish to recall is selected.
A pattern is stored in the
pocket.
e
Press
(OK key).
X
The contents of the selected pocket are
displayed.
f
Check the contents, and then press
(OK
key).
To select a different pocket, press
(Back
key).
X
The initial stitch screen appears again, and
the pattern from the selected pocket is
recalled.