Philips 17PF9946-37 - Manual (Page 10)

10
H
OW TO
U
SE THE
T
IMER
M
ENU
C
ONTROLS
Y our television comes with an onscreen clock.
The TV can also be set to turn on or off at a
specific time and tune to a specific channel when
it powers itself on.
1 Press the MENU button on the remote con-
trol to show the onscreen menu.
2 Press the CURSOR DOWN button to high-
light Features.
3 Press the CURSOR RIGHT button to
enter the Features menu.
4 Press the CURSOR UP or CURSOR
DOWN button to highlight one of the
Timer controls. These controls are Time,
Start Time, Stop Time, Program No.,
Activate, or Display.
5 Press the CURSOR RIGHT or CURSOR
LEFT button to make adjustments or to
toggle the On or Off options.
Time: Enter the current time using the
Numbered buttons. Use the CURSOR
RIGHT to move to the AM/PM slot and
use the CURSOR LEFT or CURSOR
RIGHT buttons to toggle the AM and PM
setting.
Start Time: Use the numbered buttons to
enter the time you want the TV to turn
itself On. Use the CURSOR RIGHT and
CURSOR LEFT buttons to toggle the AM
and PM setting.
Stop Time: Use the numbered buttons to
enter the time you want the TV to turn
itself Off. Use the CURSOR RIGHT and
CURSOR LEFT buttons to toggle the AM
and PM setting.
Program No.: Use the NUMBERED but-
tons or the CH + or CH- buttons to enter
the desired start-up channel. You can also
press the CURSOR RIGHT or CURSOR
LEFT buttons to enter the desired start-up
channel.
Activate: Set the timer to turn itself On
(Once or Daily) or Off. Press the CURSOR
RIGHT and CURSOR LEFT buttons to
select Once, Daily, or Off.
Display: Press the CURSOR RIGHT or
CURSOR LEFT to toggle between On or
Off. If On is selected, the time will be dis-
played all the time when the TV is on.
When Off is selected, the time will only
appear when the STATUS/EXIT button is
pressed.
6 Press the STATUS/EXIT button to
remove the menu from the screen.