Philips 17PF9946-37 User Manual
Page 34
34
T
his TV also provides you with an FM Radio. An FM
Radio signal must be connected to the FM Antenna
75
Ω Jack located on the bottom of the TV.
1
To enter the FM Mode, press the RADIO but-
ton on the remote control. The FM Mode has its
own onscreen menu options.
2
Press the MENU button on the remote control
to display the FM Mode onscreen menu.
3
Press the CURSOR UP or DOWN buttons to
scroll through the available FM Mode onscreen
options. These options include: Language, Auto
Program, or Manual Program.
LANGUAGE - Choose to view the onscreen
menu in English, French or Spanish.
AUTO PROGRAM - The Auto Program control
will search the FM antenna signal and store any
FM channel it finds in the TV’s memory.
MANUAL PROGRAM - This control will
allow you to manually tune any available FM
signals.
4
Press the CURSOR RIGHT button to adjust
or select items within the highlighted feature
sub-menu.
5
Press the STATUS/EXIT button to remove the
onscreen menu from the TV screen when fin-
ished. Or, let the display time out and the menu
will disappear after a few seconds.
S
ETTING UP THE
FM M
ODE
(FM R
ADIO
)
I
NSTALL
C
ONTROLS
T
he Mode options allow you to move to other operating
modes within the TV. When in the FM Radio Mode,
choose from TV, PC, or HD Modes.
1
If in the FM Radio mode, press the MENU but-
ton on the remote control to display the FM Radio
Mode onscreen menu.
2
Press the CURSOR DOWN button until MODE
SELECT is highlighted.
3
Press the CURSOR RIGHT button to shift the
menu to the left, accessing the Mode onscreen
menu options.
4
Press the CURSOR UP or DOWN buttons to
choose TV, PC, or HD.
TV - This will switch the TV back to the TV Mode
of operation.
PC - This control will switch the TV to the PC
Mode of operation. Note a PC signal must be pres-
ent for this to work, or the TV will go into standby
mode.
HD - This control will set the TV to the High
Definition Mode.
5
Press the CURSOR RIGHT button to activate
the selected control and change to the highlighted
mode.
6
Press the STATUS/EXIT button to remove the
onscreen menu from the TV screen when finished.
M
ODE
S
ELECT
C
ONTROLS