Philips 17PF9946-37 - Manual (Page 19)

19
U
SING THE
A
UTO
L
OCK
™ R
EVIEW
S
CREEN
T o remind you wich rating you have locked
and which Block Options you have selected,
a review screen is available to review your
AutoLock
TM settings. To access this screen follow
the steps below.
1 Press the STATUS/EXIT button on the
remote control TWICE. Your
AutoLock™ settings will appear on the
screen.
NOTE: If you have blocked specific subratings,
such as V for violence in the TV-PG category,
these blocked subratings will not appear in the
review. The subratings however are still blocked
according to your selections.
2 After a few seconds, the settings will
leave the screen automatically, or you can
press the STATUS/EXIT button a third
time to remove them from the screen.
The AutoLock™ status screen will only
appear if the Block option is set to On. See
previous page for details.
AutoLock is set to Off by default.
H
ELPFUL
H
INT
This display will appear after Step One
(above) is completed if the AutoLock™
Block Option is set to On.
This display will appear after Step One
(above) is completed if the AutoLock™
Block Option is set to Off.