Philips 190CW7CS-27 User Manual
Page 13
Troubleshooting
Vertical flicker appears
●
Press the Auto button.
●
Eliminate the vertical bars using the Phase/Clock of More
Settings in OSD Main Controls.
Horizontal flicker appears
●
Press the Auto button.
●
Eliminate the vertical bars using the Phase/Clock of More
Settings in OSD Main Controls.
The screen is too bright or too dark
●
Adjust the contrast and brightness on On-Screen Display.
(The backlight of the LCD monitor has a fixed life span. When
the screen becomes dark or begins to flicker,
please contact
your sales representative).
An after-image appears
●
If an image remains on the screen for an extended period of
time, it may be imprinted in the screen and leave an after-
image. This usually disappears after a few hours
An after-image remains after the power
has been turned off.
●
This is characteristic of liquid crystal and is not caused by a
malfunction or deterioration of the liquid crystal. The after-
image will disappear after a peroid of time.
Green, red, blue, dark, and white dots
remains
●
The remaining dots are normal characteristic of the liquid
crystal used in today’s technology.
For further assistance, refer to the
list and contact Philips customer service
representative.
file:///P|/OEM MODELS/PHILIPS/CD Manual/19/190cw7/Q41G7800-813-3...W7 EDFU-0606-2006/lcd/manual/ENGLISH/190CW7/safety/saf_troub.htm 第 2 頁 / 共 3 2006/7/5 上午 11:14:19