Brother MFC7150C - Manual (Page 224)

209
U S I N G C O L O R F A X I N G W I T H 3 D F A X S P E E D
If the Recipient Uses a Fax Machine and Scanner
Recipients who receive fax transmissions on paper at a fax machine must
use a scanner to scan the image into their computer.
3D FaxSpeed Read Module for Recipients
To decompress and read your InfoImages, the recipient’s computer must
have the 3D FaxSpeed Read Module Install Disk that you can create for
them. (See Creating Read Module Disks for Recipients.)
For recipients of your InfoImage who are using a fax machine and
scanner:
1 The InfoImage is printed on the receiving party’s fax machine.
2 Fax Machine / Scanner Requirements:
• The retrieved files are saved automatically in the Log file.
• Medium density format — If you sent the InfoImage in Medium
density format, the recipient must scan the fax printout of the
InfoImage into the computer using a 300x300 or 400x400 dpi
scanner. For Twain-supported scanners, 3D FaxSpeed automatically
will open the scanner application of the recipient’s choice. As the
recipient scans each page, 3D FaxSpeed shows how many InfoImage
blocks have been read and how many are still unread. 3D FaxSpeed
will not accept a page from a different InfoImage.
• Low density format — If you sent the InfoImage in Low density
format, the recipient can scan the InfoImage into the computer using
a 200x200 or 300x300 dpi scanner.
If a recipient’s scanner is not Twain compatible, the InfoImage can
be scanned by its scanner application, saved to disk as a file, and
retrieved by 3D FaxSpeed using the Read from file option.
3 After all the pages of the InfoImage have been scanned, 3D FaxSpeed
automatically retrieves and decompresses the original files from the
InfoImage and saves them in a Log file.
4 3D FaxSpeed then displays a list of the retrieved files and lets the
recipient view each one in its appropriate application (if that
application exists on the computer).
5 In 3D FaxSpeed, the recipient must save the retrieved files.
NOTE: Even though the list of files and their content can be viewed, the
actual files of the InfoImage are not saved unless they have saved
to disk.