Philips 231C5TJKFU-27 - Manual (Page 39)

37
11. Troubleshooting & FAQs
Ans.: Uninterrupted display of still or static
images over an extended period
may cause "burn in", also known as
"after-imaging" or "ghost imaging", on
your screen. "Burn-in", "after-imaging",
or "ghost imaging" is a well-known
phenomenon in LCD panel technology.
In most cases, the "burned in" or
"atter-imaging" or "ghost imaging" will
disappear gradually over a period of
time after the power has been switched
off.
Always activate a moving screen saver
program when you leave your monitor
unattended.
Always activate a periodic screen
refresh application if your LCD monitor
will display unchanging static content.
Warning
Failure to activate a screen saver, or a periodic
screen refresh application may result in severe
“burn-in” or “after-image” or “ghost image”
symptoms that will not disappear and cannot be
repaired. The damage mentioned above is not
covered under your warranty.
Q12: Why is my Display not showing
sharp text, and is displaying jagged
FKDUDFWHUV"
Ans.: Your LCD monitor works best at its
native resolution of 1920x1080@60Hz.
For best display, please use this
resolution.
Q13: What is the recommended refresh
UDWH IRU /&' PRQLWRU"
Ans.: Recommended refresh rate in LCD
monitors is 60 Hz, In case of any
disturbance on screen, you can set it
up to 75 Hz to see if that removes the
disturbance.
11.3 SmoothTouch
Q1: Why is the touch function not available
ZKHQ , WRXFK WKH GLVSOD\"
Ans.: Please ensure the supplied USB cable is
connected between your computer and
the display properly.
Q2: Does the touch function only exist on
WKH :LQGRZV  26"
Ans.: ANS.: The touch function works only
on OS and applications which support
touch functions, like Windows 7 and
Windows 8.
Q3: Do I have to install any software to
DFWLYDWH WKH WRXFK IXQFWLRQDOLW\"
Ans.: To activate touch functionality, all
you have to do is connect USB cable
between your computer and the display.
You don’t have to install any extra
software.
4 :K\ P\ WRXFK IXQFWLRQ LV YHU\ VORZ"
Ans.: The touch function response is
dependent on the speed of your
FRPSXWHU FRQÀJXUDWLRQ )RU H[DPSOH
your computer must be either
:LQGRZV  RU :LQGRZV  FHUWLÀHG WR
ensure minimum requirement for touch
function in order to maximize Touch
utility.
Q5: Why my touch response is not smooth
HQRXJK"
Ans.: You may need to clean the glass surface
of the display with proper screen
cleaning material from time to time, as
the glass tends to pick up dirt from your
ÀQJHUV 3OHDVH NHHS \RXU KDQGV FOHDQ
and dry before touching the screen to
HQVXUH ÁXLG WRXFK RSHUDWLRQ