Philips SENSEO® Coffee pod machine HD 7810-65 - Manual (Page 14)

14
The machine produces less sound during brewing
It prevents malfunctioning
If the descaling procedure is not performed correctly, scale residue re-
mains behind in the machine. This causes scale to build up more quickly
and may cause permanent and irreparable damage to the machine.
Use the correct descaling agent
Only citric acid-based descalers are suitable for descaling the
SENSEO \ machine. This type of descaler descales the appliance with-
out damaging it. For the correct amount, see under ‘Descaling proce-
dure’ below. Each descaling mixture can be used only once. After use,
the descaling mixture is no longer active.
We advise you to use the special SENSEO \ Descaler (HD7006). Read
the instructions on the package of the descaling agent.
Never use a descaling agent based on mineral acids such as sulphuric
acid, hydrochloric acid, sulphamic acid and acetic acid (e.g. vinegar).
These descaling agents may damage your SeNSeo \ coffee machine.
Descaling procedure
1 Mix 50 grams of citric acid with 1 litre of water in a measuring
jug. Stir until the powder is completely dissolved.
2 Fill the water reservoir up to the MAX indication with the des-
caler mixture. Then put the water reservoir back into the coffee
machine.
Note: Not all SENSEO \ machine types have a water reservoir with a
capacity of 1 litre. If you have a SENSEO
\
machine with a smaller water
reservoir, repeat steps 2 to 6 with the remainder of the mixture without
filling the water reservoir up to the MAX indication.
3 Press the on/off button
3
.
The machine is ready for use when the indicator light burns continu-
ously.
4 Place the 1-cup pod holder
q
with a used coffee pod in it in the
coffee machine. Close the lid and make sure it is properly locked.
Note: Always put a used coffee pod in the pod holder when you descale
the machine. This pod serves as a ‘filter’ to prevent the sieve or hole in the
pod holder from getting clogged with scale residue.
-
-