Philips SENSEO® Coffee pod machine HD 7810-65 - Manual (Page 15)

15
5 Put a bowl with a capacity of at least 1.6 qt /1.5 liters under the
spout to collect the descaling mixture.
6 Press the 2-cup button qq / w and let the machine operate.
Repeat this until the water reservoir is empty.
Never interrupt the descaling process!
7 Repeat steps 1 to 6. Replace the used pod with another used pod
to filter out the scale residue.
Note: To descale properly, you have to use 2 litres of descaling mixture.
Never descale the SeNSeo \ coffee machine with the lid open.
Make sure the lid is properly locked.
8 Rinse the water reservoir with tap water. Fill the water reservoir
up to the MAX indication with tap water and repeat steps 3 to 6.
Note: Do not refill the water reservoir with used hot water or the used
descaling mixture.
9 Fill the water reservoir with fresh tap water up to the MAX
indication again and repeat steps 3 to 6 once more.
Note: Always rinse the machine by letting it empty two full water reservoirs.
10 Remove the used pad and clean the pod holder after descaling to
prevent the sieve or hole in the centre from getting clogged.
Storage
If the coffee machine has already been used and therefore has been
flushed with water, it may only be used and stored in a frost-free place
to prevent it from becoming damaged. Empty water resorvoir before
storing.
Assistance
For assistance call toll free: 1-866-4 SENSEO (1-866-473-6736) or visit
our website: www.senseo.com
Authorized Norelco Service Location information is available 24 hours
a day, 7 days a week.