Philips 273E3LSB-00 - Manual (Page 24)

22
5. Power Management
5. Power Management
5.1 Automatic PowerSaving
If you have VESA DPM compliance display card
or software installed in your PC, the monitor can
automatically reduce its power consumption when
not in use. If an input from a keyboard, mouse or
other input device is detected, the monitor will
'wake up' automatically. The following table shows
the power consumption and signaling of this
automatic power saving feature:
273E3L
Power Management Definition
VESA
Mode
Video H-sync V-sync Power Used LED color
Active ON Yes Yes <27 W (typ.) White
Sleep
(Standby)
OFF No No < 0.5 W White
(blink)
Switch Off OFF - - < 0.5 W OFF
273E3LH
Power Management Definition
VESA
Mode
Video H-sync V-sync Power Used LED color
Active ON Yes Yes <27.3 W (typ.)
<32.3 W (max.)
White
Sleep
(Standby)
OFF No No < 0.5 W White
(blink)
Switch Off OFF - - < 0.3 W OFF
The following setup is used to measure power
consumption on this monitor.
Native resolution: 1920 x 1080
Contrast: 50%
Brightness: 300 nits
Color temperature: 6500k with full white pattern
Note
This data is subject to change without notice.