Automatic power saving, Srgb – Philips 109B407499 User Manual
Page 10
• Input signal levels
0.7 Vpp
• Sync input signal
Separate sync
• Sync polarities
Positive and negative
WHITE COLOR TEMPERATURE
Chromaticity CIE coordinates:
• at 9300 degrees K
x = 0.283 / y = 0.297
• at 6500 degrees K
x = 0.313 / y = 0.329
• at 5500 degrees K
x = 0.332 / y = 0.347
sRGB
sRGB is a standard for ensuring correct exchange of colors between different devices (e.g. digital cameras,
monitors, printers, scanners, etc.)
Using a standard unified color space, sRGB will help represent pictures taken by an sRGB compatible
device correctly on your sRGB enabled Philips monitors. In that way, the colors are calibrated and you can
rely on the correctness of the colors shown on your screen.
Important with the use of sRGB is that the brightness and contrast of your monitor is fixed to a predefined
setting as well as the color gamut. Therefore it is important to select the sRGB setting in the monitor's OSD.
To do so, open the OSD by pressing the OK button on the front of your monitor. Use the down button to go
to Color temperature and press OK again. Then move the down button to go to sRGB and press OK again.
Exit this OSD.
After this, please don't change the brightness or contrast setting of your monitor. If you change either of
these, the monitor will exit the sRGB mode and go to a color temperature setting of 6500K.
* These information are subject to change without notice.
Automatic Power Saving
If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically
reduce its power consumption when not in use. And if an input from a keyboard, mouse or other input device is
detected, the monitor will automatically "wake up". The following table shows the power consumption and signaling
of this automatic power saving features:
Power Management Definition
109B Product Information
file:///D|/EDFU/LF3/lf3manual/english/109B/PRODUCT/PRODUCT.HTM (6 of 8) [2003/3/27 ?? 11:38:17]