Philips DCM230-37B - Manual (Page 17)

English
17
2
Insert a disc into the disc loader..
➜
Make sure the label side is facing up.
➜
Make sure you have removed any other disc
from the slot loader.
3
Press ÉÅ to start playback.
4
At any time, simply press 9 to stop playback.
Basic playback controls
To play a disc
● Press ÉÅ to start playback.
➜ The current track number and elapsed
playing time of the track are displayed during
disc playback.
To select a different track
●
Press S / T (or
¡ / ™ on the remote
control) once or repeatedly until the desired
track number appears in the display.
●
You can also use the Numerical Keypad
(0~9) on the remote to select a track directly.
●
If you have selected a track number shortly after
loading a disc or in the PAUSE position, you will
need to press
ÉÅ to start playback.
Text display during playback
In CD mode
● Press DISPLAY repeatedly to see the
following information.
➜
Track number and elapsed playback time of
current track.
➜
Track number and total elapsed playback
time.
➜
Track number and remaining playback time
of current track.
➜
Track number and total remaining playback
time.
➜
Clock time.
In MP3-CD mode
● Press DISPLAY to display the ID-3
information if available and the clock time.
Important!
The lens of the CD player should never be
touched.
Loading a disc
This CD player plays Audio Discs including CD
Recordables, CD-Rewritables and MP3 CD.
●
CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
●
DRM-protected WMA disc is not supported.
1
Press SOURCE on the top of the system to
select CD or press CD on the remote.
CD/MP3-CD Operation
TIMER
iPod
pg001-028_DCM230_37-Eng 2010.3.31, 15:02 17